+971 56 431 4092
Washing Machines

Common Washing Machine Problems in Dubai and How to Identify Them

A washing machine usually gives warning signs before it stops working altogether. This guide explains the common faults we see in Dubai homes, what each symptom usually points to, and which checks are safe to try before you call for help.

Illustration of a front-loading washing machine with a green check mark, representing common washing machine problems in Dubai
In this guide
  1. Why washing machines in Dubai work harder
  2. The machine does not start or switch on
  3. Water does not drain or stays in the drum
  4. The drum will not spin, or spins poorly
  5. Vibration, shaking or banging
  6. Water leaking from the machine
  7. Clothes smell or do not come out clean
  8. When to stop and call a technician
  9. Simple habits that reduce faults
  10. Frequently asked questions

Why washing machines in Dubai work harder

Dubai's climate puts extra demands on home appliances. Summer heat and humidity make it harder for moisture to dry out of door seals and detergent drawers, which encourages odours and mould. Tap water in many areas is hard, so limescale can build up in hoses, valves and heating elements over time. Fine sand and dust can also reach filters and drain systems. None of this means a machine will fail, but regular attention makes faults less likely.

The machine does not start or switch on

When nothing happens at all, the cause is often simple. Check that the plug is firmly in the socket and that the socket has power, for example by testing it with a lamp or phone charger. Look at the consumer unit to see whether the circuit breaker has tripped. Make sure the door is fully closed and a programme is selected, because many machines will not start if the door latch is not engaged.

If the display lights up but the machine stops at the start of a cycle, note any error code. Codes are model specific, and your manual or a technician can explain what the code means. Repeated codes after a restart usually point to a fault that needs inspection.

Water does not drain or stays in the drum

Drainage faults are among the most common reasons people call for repair. The usual causes are a blocked drain filter, where coins, hair, lint and small objects are typical culprits, a kinked or blocked drain hose, or a fault in the drain pump.

To check the filter safely, switch the machine off at the wall and unplug it. Place a shallow tray and towels in front of the filter, then turn the filter slowly anticlockwise to release any water. Clear the debris and refit the filter securely. Do not reach into the pump housing or remove parts from inside the machine while it is connected to power.

The drum will not spin, or spins poorly

A badly unbalanced load is one of the most common causes and is often easy to fix. Spread the items evenly, and avoid washing a single heavy item such as a bath mat or duvet on its own. Spin problems can also come from drainage faults, because many machines stop spinning while they still hold water. Worn drive belts, lid or door switches and motor faults need a technician to test them properly.

Vibration, shaking or banging

Some movement during spin is normal, but a machine that walks across the floor or bangs loudly needs attention. Check that the machine is level by adjusting the feet, and confirm that the transit bolts at the back were removed when it was installed. If shaking continues with a balanced load on a level floor, worn suspension parts or bearings may be involved, and the machine should be inspected rather than run until it fails.

Water leaking from the machine

Leaks can come from several places. Look at the door seal, the detergent drawer, the hose connections and the base. A leak from the base often points to the drain pump or a cracked housing. Turn off the water tap, switch the machine off, and dry the area before looking for the source. Do not keep running a machine that is leaking, because water can reach electrical parts and the floor below.

Clothes smell or do not come out clean

Musty smells usually come from detergent residue, damp rubber seals and water left in the drum. Leave the door and detergent drawer open between washes so they can dry, and use the correct amount of detergent for the load and the water hardness. Limescale in the heating element or hoses can also reduce cleaning performance. Follow the manufacturer's advice on maintenance cycles and cleaning products.

When to stop and call a technician

Some symptoms are reasons to switch the machine off and call for help rather than trying to diagnose it yourself:

  • A burning smell, scorch marks or sparks from the socket or the machine
  • A circuit breaker that trips each time the machine runs
  • Water near the control panel or the motor
  • Error codes that return after a restart
  • Loud grinding, metallic noise or a drum that feels rough
  • Any fault that continues after the simple checks above

Always unplug the machine before inspecting it. Do not open the control panel, the motor or the drum mounting unless you are trained to do so.

Our technicians diagnose the fault first and confirm the price before any work begins. You can request a visit online, call, or send a WhatsApp message to get started.

Simple habits that reduce faults

Clean the drain filter regularly, leave the door open after each wash, avoid overloading, and descale hoses and the machine when the manual recommends it. Keeping the area around the machine dry makes it easier to spot leaks early.

FAQ

Frequently Asked Questions

Why does my washing machine smell even after cleaning?

Persistent odours usually come from detergent residue in the drawer, moisture trapped in the door seal, or limescale in the drum and hoses. Dry the seal and drawer after use and check the manual for a maintenance cycle. If the smell continues, a technician can check the drain system.

Is hard water damaging my washing machine?

Hard water can leave limescale on heating elements, valves and hoses, which can reduce performance and shorten the life of parts over time. Using the correct detergent amount and following the manual's descaling advice helps. A technician can check whether scale is affecting the heater or the valves.

Can I fix a washing machine problem myself?

Simple checks such as the plug, the breaker, the door latch, the drain filter and the load balance are safe to do. Anything involving electrical components, motors, control boards or the inside of the machine should be left to a qualified technician.

Digital Marketing Experts

Grow Your Business Online Today

With years of experience in digital marketing since 2005, we help businesses build a strong online presence and reach more customers. Our expert team specialises in SEO, Google Ads, social media marketing and professional web design. We focus on real results, quality leads and sustainable business growth. Let us help your business stand out and grow online!

WhatsAppVisit Website
Related Service

Washing Machine Repair Dubai

Washing Machine Repair DubaiOur technicians diagnose the fault first and confirm the price before any work begins.

Our full list of appliance repairs is on the services page.

Keep Reading

Related Repair Guides

Digital Marketing by Global Digital Marketing Services